2023 Season – Week 2

Two members work on the gripper.Week 2 is finished. We're working on autonomous driving, the gripper claw (to grab cones and cubes), and the telescoping arm that the gripper will get mounted on. But most importantly, we're working on getting the website running. 

2022 Science Museum in Raleigh

After a fun and exciting season, we were more than happy to spend a day showcasing our robots at the North Carolina Museum of Natural Sciences. It was a fun day showing kids and parents our robots, and letting the kids drive the robots around and shoot balls.

2022 NC State Championship

After two competitions where we struggled with robot issues, we were excited to get a chance to go to the 2022 state finals! Finally, it was time for the competition to start! On the day of load-in, we were ready for the competition and in high spirits, but we were...

2022 FNC District Guilford County Event

We are so excited to compete again with a better working robot. We ended up loosing in the first round of the playoffs, but we won the Imagery award.

2022 FNC District ECU Event

Its the teams first competition in a year and a half. We are so excited to compete again with a working robot. We ended up loosing in the semifinals, but we won the Gracious Professionalism award.

2019 NC State Championship

After our two back-to-back competitions, we were excited to get a chance to relax and catch up on life and some good tea! Our break was quite restful, but we knew that preparation for States had to begin soon. A few days after the end of Guilford, we met to unpack...

2019 Guilford County District Event

During the week leading up to our next competition at the Guilford County District Event, our main goal was to improve our ball collector. Cargo scored more points, so we decided not to focus on scoring hatches. At the previous competition, we noticed that Deep...

2019 Wake County District Event

After bagging and tagging our 2019 robot, Deep Thought, we took a few days to catch up on some sleep and school. However, we knew that our break could not be long due to our mechanical falling behind schedule quite a bit. With that in mind, we set out to improve the...

2019 Build Season: Week 6

Week 6 was spent getting everything ready before for the end of build season. During this week, our main goals were to finish all mechanical aspects, which needed quite a bit of work, and spend time calibrating our code. While we were able to learn from last year’s...

2019 Build Season: Week 5

One of our main focuses of Week 5 was to finish fabricating our lift mechanism. Mechanically, we were able to accomplish that goal and more! Our endgame mechanism is mostly finished and mounted to our 2019 robot, and our collector for the hatches and cargo was worked...

2023 Season – Week 2

Two members work on the gripper.Week 2 is finished. We're working on autonomous driving, the gripper claw (to grab cones and cubes), and the telescoping arm that the gripper will get mounted on. But most importantly, we're working on getting the website running. 

2022 Science Museum in Raleigh

After a fun and exciting season, we were more than happy to spend a day showcasing our robots at the North Carolina Museum of Natural Sciences. It was a fun day showing kids and parents our robots, and letting the kids drive the robots around and shoot balls.

2022 NC State Championship

After two competitions where we struggled with robot issues, we were excited to get a chance to go to the 2022 state finals! Finally, it was time for the competition to start! On the day of load-in, we were ready for the competition and in high spirits, but we were...

2022 FNC District Guilford County Event

We are so excited to compete again with a better working robot. We ended up loosing in the first round of the playoffs, but we won the Imagery award.

2022 FNC District ECU Event

Its the teams first competition in a year and a half. We are so excited to compete again with a working robot. We ended up loosing in the semifinals, but we won the Gracious Professionalism award.

2019 NC State Championship

After our two back-to-back competitions, we were excited to get a chance to relax and catch up on life and some good tea! Our break was quite restful, but we knew that preparation for States had to begin soon. A few days after the end of Guilford, we met to unpack...

2019 Guilford County District Event

During the week leading up to our next competition at the Guilford County District Event, our main goal was to improve our ball collector. Cargo scored more points, so we decided not to focus on scoring hatches. At the previous competition, we noticed that Deep...

2019 Wake County District Event

After bagging and tagging our 2019 robot, Deep Thought, we took a few days to catch up on some sleep and school. However, we knew that our break could not be long due to our mechanical falling behind schedule quite a bit. With that in mind, we set out to improve the...

2019 Build Season: Week 6

Week 6 was spent getting everything ready before for the end of build season. During this week, our main goals were to finish all mechanical aspects, which needed quite a bit of work, and spend time calibrating our code. While we were able to learn from last year’s...

2019 Build Season: Week 5

One of our main focuses of Week 5 was to finish fabricating our lift mechanism. Mechanically, we were able to accomplish that goal and more! Our endgame mechanism is mostly finished and mounted to our 2019 robot, and our collector for the hatches and cargo was worked...

2019 Build Season: Week 4

During Week 4, our Mechanical Team finished attaching our lifting mechanism and the battery holder to our chassis and have begun to build a few things for the mechanism we are using for manipulating the cargo and hatches. On our Programming Team, they worked on...

2019 Build Season: Week 3

Week 3 was full of building and testing stuff! It started off with a bang by drinking some tea and driving our completed chassis around, and for the rest of the week, our Mechanical Team focused on building the mechanism to get the balls and hatches into the rockets...

2019 Build Season: Week 2

At the start of Week 2, we were hard at work making a CAD (Computer-Aided Design) model of our robot and continuing to prototype different robot mechanisms, including the hatch and cargo collector. After a few days, we had a more concrete CAD model of this year’s...

2019 Build Season: Kickoff and Week 1

This 2019 season, FIRST NC invited our team along with Team 7763, Carrborobotics (our mentee team), to attend a special Kickoff at Hangar6 sponsored by Caterpillar. At Kickoff, we were able to talk with and learn from NC FRC judges and Caterpillar while bonding with...

2018 Apex Christmas Parade

For three years, we participated in the Cary Christmas Parade, spreading the message of FIRST to hundreds of people. The last two years, however, we decided to participate in Apex’s Christmas Parade instead. As late October and November rolled around, we began to...

Subscribe For the Latest news & Updates

Fill out the form to join the team's newsletter. Stay up-to-date on the team's progress!